1. Product Introduction of the Fire Alarm Control Panel
A Fire Alarm Control Panel (FACP), or Fire Alarm Control Unit (FACU), is the controlling component of a Fire Alarm System. The panel receives information from environmental sensors designed to detect changes associated with fire, monitors their operational integrity and provides for automatic control of equipment, and transmission of information necessary to prepare the facility for fire based on a predetermined sequence. The panel may also supply electrical energy to operate any associated sensor, control, transmitter, or relay.
The Conventional Fire Alarm Control Panel is a 9-270 volt, four, eight, sixteen-zone, Class B. Designed exclusively to meet the latest market requirements and future ULC codes, the fire alarm system can be used in a variety building applications.
2. Product Parameter of the Fire Alarm Control Panel
* AC POWER: 220VAC, 50 Hz.
* BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 27.6VDC @ 0.8 amp for normal flat charge. Maximum battery charger capacity: 18AH battery.
* NOTE: Two 10AH batteries can be housed in the cabinet. Larger batteries require a separate battery box.
* Total DC24V system power: 3.0 amps.
* Maximum current per NAC: 1.25 amps.
* Maximum battery charging capability: 18 AH.
* Resettable four-wire smoke detector power output.
* Non-resettable power output.
* Integral Form-A Alarm, Trouble and Supervisory relays, rated at: 2.0 amps @ 30 VDC (resistive), 2.0 amps @ 30 VAC (resistive).
3.Product Feature And Application of the Fire Alarm Control Panel
*Four, Eight, Sixteen Zone Style B (Class B) Initiating Device Circuits (IDCs), All zones accept two-wire smoke detectors and any normally-open contact devices.Two Supervisory Input with DC12V output, ideal to connect security alarm devices.
* Three General Alarm, Trouble and Supervisory, Form A Relay Output.
* One, Two, Four Built-in Sound Output, Style Y (Class B) Notification Appliance (Signal) Circuits (NACs), NACs may be programmed: Silenceable or Non-Silenceable.
* 3.0 amps of total system power. Resettable DC24V & Non-resettable DC24V Output.
* Zone Input Short Circuit can be set to “Alarm” or “ Fault” mode.
* RS485 Communication Port (optional). Automatic/Manual mode can be programmed.
* Disable/Enable control per Zone (IDC) can be programmed.
* Disable/Enable Sound Output(NACs) can be programmed.
4. Production Details of the Fire Alarm Control Panel